Outdoor Temperature - PCE Instruments PCE-FWS-20 Manual De Usuario

6.3.2

Outdoor temperature

temperature related setting by
Activate the outdoor
1. Touch the OUTDOOR TEMPERATURE section, + button
and – button will be flashing. Touch the + button or – button
to Shift the display between Outdoor Temperature, Wind
Chill and Dew Point.
2. Touch the OUTDOOR TEMPERATURE section again, +
button and – button will be flashing. Touch the + button or –
button to Shift the display unit between °C and °F.
3. Touch the OUTDOOR TEMPERATURE section the third
time to set the outdoor temperature high alarm function, the
+, ON/OFF and – button will be flashing, HI AL icon will light
up. Touch the + button or – button to change the value, hold
the + button or – button for 3s to change the number in
great step. Touch the ON/OFF button to choose the alarm
on or off (if alarm is enabled, the speaker icon will be turned
on indicating the alarm function has been enabled).
4. Touch the OUTDOOR TEMPERATURE section the fourth
time to set the outdoor temperature low alarm function, the +, ON/OFF and – button will be
flashing, LO AL icon will light up. Touch the + button or – button to change the value, hold the +
button or – button for 3s to change the number in great step. Touch the ON/OFF button to
choose the alarm on or off (if alarm is enabled, the speaker icon will be turned on indicating the
alarm function has been enabled).
5. Touch the OUTDOOR TEMPERATURE section the fifth time to display maximum outdoor
temperature record, the recorded maximum value will be flashing, MAX icon will light up. Hold the
flashing max value for 3s, the maximum value will be reset to current reading.
6. Touch the OUTDOOR TEMPERATURE section the sixth time to display minimum outdoor
temperature record, the recorded minimum value will be flashing, MIN icon will light up as well.
Hold the minimum value for 3s, the minimum value will be reset to current reading.
Manual
12