Introduction; Safety Notes - PCE Instruments PCE-FWS-20 Manual De Usuario

1

Introduction

Thank you for purchasing a meteorological station from PCE Instruments.
This Weather Station is a high quality, easy to use weather monitoring system that reads, displays and
records the weather data from internal as well as external sensors. Besides the internally measured
values for indoor temperature, indoor humidity and air pressure the outdoor sensor will take data for
temperature and humidity, wind and rainfall. Operation of these units is by wireless transmission to the
Base Station.
After installing the "EasyWeather" program on this CD-ROM, your PC can display all indoor data as well
as the weather data from the Base Station received from the external sensors. For operation, simply use
the USB cable supplied and connect the Base Station to the PC. From now on you can start to track
current and history weather information at your fingertips.
2

Safety notes

Please read this manual carefully and completely before you use the device for the first time. The device
may only be used by qualified personnel and repaired by PCE Instruments personnel. There is no
warranty of damages or injuries caused by non-observance of the manual.
- The device may only be used in approved temperature range
- The opening of the case should only be done by qualified personnel of the PCE Instruments.
- The instrument should never be placed with the user interface (e.g. keyboard side on a table)
- You should not make technical changes on the device
- The appliance should only be cleaned with a damp cloth / use only pH-neutral cleaner
This user's handbook is published from PCE Instruments without any guarantee.
We expressly point to our general guarantee terms, they can be found in our general terms of business.
If you have any questions please contact PCE Instruments.
Manual
3