The minimum distances must be observed. See the
following graphic.
min. 50 cm
min. 50 cm
min. 50 cm
Electrical connection
1. Unwind the mains cable completely.
2. Make sure that the unit voltage (see type plate)
and mains voltage match.
3. Make sure that the unit is completely switched
off when you plug it in.
4. Only connect the mains plug to a properly
installed and fused socket outlet with earthing
contact.
5. Make sure that the mains cable is always routed
behind the unit - never in front of it!
Warning of electrical voltage
Warning: Fire hazard!
Extensions of the mains cable must be selected
taking into account the appliance connection power,
the intended use and the cable length. Do not use
multiple sockets. Do not connect any other powerful
devices to the power circuit.
Make sure that extension cables are fully unwound or
uncoiled.
Always check the condition of the mains
cable before using the unit. If you have
any doubts about the condition of the
power cord, please contact the custo-
mer service.
Lay the mains cable in a place where no one can trip
over it.
Never pull the appliance by the mains cable, but use
the handle provided.
min. 50 cm
min. 100 cm
Note
Odours may occur during initial operation or after a
longer period of non-use.
ENGLISH
19