Team kalorik TKG MW 2500 DG Modo De Empleo página 10

Time preselection
With this setting you can let the appliance start at a certain time to heat up a dish. First
make sure that the clock time has been set correctly.
1. Put the foodstuffs into the microwave oven.
2. Choose the desired operation mode and power level as described above.
3. Set the desired cooking time.
4. Press the preset/clock/defrost key for 3 seconds.
5. Choose the desired hour at which the appliance has to start with the rotary knob.
Confirm with the preset/clock/defrost key.
6. Choose the desired minutes with the rotary knob. Confirm now with the
preset/clock/defrost key.
7. A beep sounds and the clock symbol flashes on the display.
8. The cooking process will start at the preset clock time.
When you have set the timer, you can check when the cooking will start by pressing the
preset/clock/defrost key. The starting time is shown on the display for 1 second; then the
display shows the clock time again.
CLEANING AND MAINTENANCE
1. Turn off the oven and remove the power plug from the wall socket before cleaning.
2. It is very important to clean the oven door.
3. Keep the door, the inside cavity, glass tray, roller ring and the waving guide of the oven
clean by wiping with a damp cloth.
4. Mild detergent may be used if the oven gets very dirty. Avoid the use of spray and other
harsh cleaners.
5. The outside surfaces should be cleaned with a damp cloth. To prevent damage to the
Caution : water should not seep into the ventilation openings or control panel.
6. The lamp is a led bulb, if it should not light up anymore do not try to replace it yourself
and contact a competent qualified service.
TKG MW 2500 DG 10