Publicidad
Idiomas disponibles
Idiomas disponibles
1
2
3
4
www.AEG.com
12
ENGLISH
Pull the S-BAG button to open the dust compartment. The handle of the
GB
s-bag holder goes up. Pull the handle to remove the s-bag with holder. Do not
Thank you for choosing AEG VX9 vacuum cleaner. Always use original
press the release button.
accessories and spare parts to get the best results. This product is designed
13
Hold the s-bag with holder over a dust bin. Press the button to release the
DE
with the environment in mind. All plastic parts are marked for recycling
s-bag. Insert a new s-bag to the holder by inserting the cardboard at the back
purposes.
of the holder.
ES
14
Insert the s-bag with holder by pushing it straight down in its tracks. Make
BEFORE STARTING
sure the s-bag is not stuck under the holder. Close the lid. If the s-bag is not
• Read this manual carefully.
properly placed or is missing, the lid will not close.
FR
• Check that all parts described are included.
NB: When you start the cleaner after s-bag replacement, It takes 10 seconds
• Pay special attention to the safety precautions!
before the S-BAG indicator turns off (P* Models with rotary knob and Q*
GR
DESCRIPTION OF VX9 VACUUM CLEANER
Models with remote control) or turns green (R* Models with remote control
and AUTO).
A. Display (see versions later)
Q. Display for models with remote
IT
REPLACING THE FILTERS
B. Exhaust filter lid
control*
C. Exhaust filter
R. Display for models with remote
15
Replace/clean** the filter when (**washable filter only)
D. Parking slots
control and AUTO function*
- P* Models with rotary knob: you have changed the s-bag 5 times
NL
E. Power cord
S. AeroPro Classic handle*
- Q* Models with remote control: FILTER symbol lights up in red
F. Motor filter
T. AeroPro Ergo handle*
- R* Models with remote control and AUTO: filter indicator lights up in red.
G. Motor filter holder
U. AeroPro Remote Control handle*
Green light indicates that the filter is ok. It lights up briefly when you start the
PT
H. S-bag®
V. PrecisionFlow nozzle*
vacuum cleaner.
I. S-bag® holder
W. PrecisionFlow LED nozzle (with
16
Pull the FILTER button to open the filter lid. Use original s-filters. Remove the
J. Dust compartment cover
front lights)*
filter and check the reference on the frame to define type. Replace with a new
K. AeroPro 3in1 tool
X. AeroPro Turbo nozzle*
filter or clean it**. Rinse the inside (dirty side) in lukewarm tap water. Tap the
L. AeroPro hose
Y. AeroPro Mini Turbo nozzle*
filter frame to remove the water. Repeat the process four times. (**washable
M. AeroPro handle (see versions
Z. ParkettoPro nozzle*
filter only)
later)
AA. AeroPro FlexProPlus nozzle*
NB: Do not use cleaning agents. Avoid touching the filter surface. Let the
N. AeroPro telescopic tube
AB. AeroPro Long crevice nozzle*
filter dry completely (min. 24 h in room temperature) before putting back
O. Parking clip
! Change the washable filter at least once a year or when it is very dirty or
P. Display for models with rotary
* Certain models only
damaged. Do not remove the L-shaped foam under the filter.
knob manual control*
17
After replacing the filter, close the filter lid until it is clicked back into place. If
the filter lid comes off, position the hinges at the bottom and push the filter
lid until it is clicked back into place.
HOW TO USE THE VACUUM CLEANER
1
NB: When you start the cleaner after filter replacement, It takes 10 seconds
Open the dust compartment cover by pulling the S-BAG button. Check that
before the FILTER indicator turns green (models with remote control and
the dust bag (s-bag) is in place.
AUTO function) or turns off (remote control models).*
2
Insert the hose into the cleaner (to remove it, press the lock buttons and pull).
18
Replace the motor filter when dirty or after every 5th s-bag. Push the filter
Insert the hose into the hose handle until the lock button clicks (to release it,
holder down and pull it out. Exchange the filter and close the lid.
press the lock button and pull).
3
Attach the telescopic tube to the nozzle. Attach the telescopic tube to the
VACUUMING WITH THE UNIVERSAL NOZZLE (V*, W*)
hose handle (to remove it, press the lock button and pull).
19
Change nozzle setting with the pedal. Icon illustrates recommended floor
4
Adjust the telescopic tube by holding the lock with one hand and pulling the
type.
handle with the other hand.
20
PrecisionFlow LED nozzle*: Move the nozzle forward. The front light turns
on automatically after a few seconds. When the nozzle is not used, the light
START/STOP THE VACUUM CLEANER AND ADJUST SUCTION POWER
turns off automatically after a few seconds.
5
Pull out the power cord and plug it into the mains. Press the ON/OFF button
to turn the cleaner on/off. Indicators light up, MIN/MAX indicator lights up
CLEANING THE UNIVERSAL NOZZLE (V*, W**)
from left to right and back (auto function models).* Models with remote con-
21
Disconnect the nozzle from the tube. Clean with the hose handle.
trol can also be operated by the ON/OFF button on the handle.*
6
Adjust suction power (manual control models): Turn the rotary knob on the
cleaner or use the air valve on the handle.*
CLEANING THE TURBO NOZZLE (X*)
22
7
Adjust suction power (remote control models): Press +/- button on the han-
Disconnect the nozzle from the tube and remove entangled threads etc by
snipping them away with scissors. Use the hose handle to clean the nozzle. *
dle. MIN/MAX and symbols indicators on display will show level of power.*
8
Adjust suction power (remote control models with AUTO): The cleaner starts
3IN1 ACCESSORY TOOL
in AUTO mode (automatic power regulation). AUTO indicator is illuminated
on the display and MIN/MAX indicator pulses. To regulate power manually
23
Pull the textile tab to take out 3in1 tool. The tool has 3 functions, see pictures
press +/- button on handle. Press AUTO button to return to auto-function.*
on next page.
9
After cleaning, push the REWIND button to rewind the cable.
24
After usage, put it back in its place.
PARKING POSITIONS
10
Use parking position on the side (A) or underneath (C) to carry and store the
cleaner. At the back (B) when you pause (save your back).
REPLACING THE DUSTBAG, S-BAG®
11
Replace the s-bag when
- P* Models with rotary knob: S-BAG indicator lights up in red
- Q* Models with remote control: S-BAG symbol lights up red.
- R* Models with remote control and AUTO: S-BAG indicator lights up in red
(green light: bag is OK, yellow light: soon time to replace bag).
NB: Always change the s-bag when S-BAG indicator is illuminated or has
red light even if the s-bag is not full (it may be blocked) and after using
carpet cleaning powder. For best possible performance, use the Ultra Long
Performance bag which is especially developed for your cleaner. Other
synthetic s-bags can also be used. Do not use paper dust bags! www.s-bag.com
www.AEG.com
2
5
6
7
GB
DE
ES
FR
GR
9
10
IT
NL
PT
11
12
13
15
16
17
19
20
21
23
24
25
www.AEG.com
8
14
18
22
26
Publicidad
