Publicidad
Idiomas disponibles
Idiomas disponibles
CHANGING THE UNIT OF MEASURE
•
After the measuring tool is switched on, push down and hold On button for approx. 3 seconds to
change the unit.
Note: The unit of measure can be changed any time, even for measured values.
CHARGING
•
Connect the USB cable properly to charge the measuring tool. Battery Indicator flashes when
charging
•
When Battery Indicator stops flashing, the charging is completed. Remove the USB Cable.
MAINTENANCE
Store the laser distance measurer indoors.
Keep the laser distance measurer free of dust and liquids. Use a damp cloth and mild soap to
clean the outside casing. Avoid using solvents when cleaning plastic parts. Most plastics are
susceptible to damage from various types of commercial solvents and may be damaged by their
use.
To clean the laser lens, if needed, use ONLY a soft cloth or cotton swab moistened with glass
cleaner.
Do not disassemble the laser distance measurer. This could cause exposure to hazardous laser
radiation.
Do not attempt to change any part of the laser lens.
WARRANTY
For 3 year from the date of purchase, the product is warranted for the original purchaser to be free
from defects in material and workmanship. This guarantee does not cover damage due to abuse,
normal wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable parts
and accessories expected to become unusable after a reasonable period of use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at no
charge. This guarantee gives you specific legal rights, and you may also have other rights that
vary from state to state.
7
Printed in China
Publicidad
