Ibiza sound VHF2 Manual De Instrucciones página 3

INSTALLATION
1. Connect XLR mix output to microphone input of your mixer
2. For a good operation, don't place the receiver near to
sources of interference. Place the receiver in 1m distance from
the ground and let at least 1m free space around the receiver.
DESCRIPTION RECEIVER
1- Antennae : Unfold the antennas to their maximum length to get the best possible signal for each channel
2- Power switch : Use this button to switch the receiver on or off
3- Power led : When you switch the receiver on, this led lights up. That means the receiver is on.
4- CH2 RF led : This led lights on when you switch the MIC 2 handheld transmitter on. That means the wireless
© Copyright LOTRONIC 2012 VHF1 / VHF2 Page 3