Changing The Setting; Setting; Coffee Temperature (P. Gb29); Heating Mode (P. Gb29) - Panasonic NC-ZA1 Instrucciones De Funcionamiento

Changing the setting

O Changing settings from the default.
Coffee temperature
Select temperature from 5 levels on your drink.
(Default setting: middle)
1
Press on the main menu.
2
Select "coffee temperature" on the user
menu.
3
Select level and press

setting.

• The selected setting will light up in blue.
Low
Note
• If there is no action for 30 seconds, the display will return to
the main menu without saving the setting.
• If is pressed, the display will return to the previous
display without saving the setting.
• When setting is completed, the display will return to the user
menu. To return to the main menu, press
to save the
High
.
Heating mode
Select heater condition from 3 modes. (Default
setting: Eco mode)
1
Press on the main menu.
2
Select "heating mode" on the user menu.
3
Select level and press
setting.
• The selected setting will light up in blue.
Eco mode
Standard mode
(Eco mode)
There is a short wait as the heating system is only
switched on when a drink is to be brewed.
Recommended when the machine is used
occasionally.
(Standard mode)
The heating system is turned on, only for coffee and
espresso with a short waiting time. Recommended for
frequent preparation of coffee and espresso.
(Standby mode)
The heating system and additional heating are
activated permanently. Recommended for frequent
preparation of speciality coffees.
to save the
Standby
mode
GB29