HOTO Smart Laser Measure Pro Manual Del Usuario página 5

Measuring angles
Flip the switch up or down to launch the Angle Measuring mode. Angle is
displayed in real time.
Press the power/measure button again to stop laser emission. Numbers will
stop to show measurement values.
Measuring angles and height
Flip the switch up and down to initiate the Angle and Height Measurement
mode.
Short press the measure button once to emit laser. The measurement will be
conducted in real time and seen on the display.
Press the measure button again to stop laser emission. The number will stop
and show the measurement data of a triangle's hypotenuse and inclination.
After measuring the hypotenuse and inclination, the instrument will
automatically calculate the height and horizontal distance.
To continue the measurement, short press the measure button again.
Measuring size
Flip the switch up or down to enter the Size Measurement mode.
Short press the measure button once to emit laser. The measurement will be
conducted in real time and seen on the display. Press the measure button
again to stop laser emission. The measurement shows the rectangle's length.
Use the same method to measure the rectangle's width, and the instrument
will automatically calculate the rectangle's size.
To continue the measurement, short press the measure button again.
4