HOTO Smart Laser Measure Pro Manual Del Usuario página 7

Bluetooth connection
Bluetooth is on by default and cannot be turned off manually. The sceen will
show a " ".
Bluetooth will automatically turn on once when product is started, displaying
a flashing "
devices to pair with.
When the product is started, open the HOTO app and click the upper right
corner to add a device. Follow the steps, and the "
on when the connection is successful.
If the connection fails within 180s, Bluetooth will automatically turn off to
save energy.
Note: HOTO Smart Laser Measure Pro has a non-independent and complete
Bluetooth module with CMIIT ID: 2020DP2859.
Tips
If the QR code cannot be scanned, please search for the product name to add
the device.
Due to updates on the HOTO app, the actual operation may slightly differ from
the description provided above. Please follow the indications on the app.
Switching reference plane
By default, the reference plane of the product is the end reference " ". So
please use the product end " " as the reference plane. To use the front
reference " ", please switch the reference plane in Product Settings -
Rangefinder Settings in the app.
" icon flashing. The HOTO app will automatically search for
" will be permanently lit
6