2
Operation
2.1 Preparation
1. Remove all packaging and sticker materials and
dispose of them according to the applicable
local regulations.
When using the appliance for the
first time, smoke can develop due
to production residues. However,
this does not mean the appliance
C
is defective. The first time you
switch it on use the appliance as you
normally would but without bread. It
is recommended to use the medium
setting of the browning control (3).
Ensure for proper room ventilation.
2.2 Toasting
Selecting 1 from the browning
C
control (3) will give the lightest
degree of browning and selecting 7
the darkest.
C
The browning degree can vary
depending on the type of bread.
When toasting several slices of
bread consecutively, the toaster will
C
become hotter and therefore the
bread will gradually become darker.
Therefore select an appropriate
browning degree.
The browing degree of one slice is
C
darker than two slices, although
the browning control (3)is set to the
same level.
If the power plug is not connected
C
to the wall socket, the start lever (2)
does not snap into place.
10 / EN
The degree of browning can also be
C
adjusted during the toasting process
with the browning control (3).
To cancel the toasting process
before it has finished, press the
C
stop button (6). The start lever (2)
springs back up and the toast slices
can be taken out of the toaster.
After the start lever (2) springs
C
back up, you can use the high-lift
function by pushing the start lever
(2) upwards.
WARNING: Be very careful when
taking the toast slices out of the
A
toaster as the metal parts of the
toaster and also the bread can
become very hot.
If toast slices get stuck in the
toaster, switch the toaster off
immediately by pressing the stop
button (6). Pull the power plug out
of the wall socket. Let the toaster
C
cool down completely. Carefully try
to take the bread out of the toaster
without damaging the sensitive
heating elements and other parts.
Do not use any electroconductive
objects to remove the bread from
the toaster.
2.3 Toasting frozen bread
When the defrost button (4) is
C
pressed, the toasting process takes
longer than with normal toasting.
To cancel the toasting process
before it has finished, press the
C
stop button (6). The start lever (2)
springs back up and the toast slices
can be taken out of the toaster.
Toaster / User Manual