Cardin Elettronica S486 Serie Datos Técnicos, Dibujos Técnicos De Instalación Y Referencias página 10

REMARKS
These instructions are aimed at professionally qualified "installers of electrical equipment" and must respect
the local standards and regulations in force. The use and installation of these appliances must rigorously
respect the indications supplied by the manufacturer and the safety standards and regulations in force.
Attention! Only for EU customers - WEEE marking. This symbol indicates that once the
products life-span has expired it must be disposed of separately from other rubbish. The
user is therefore obliged to either take the product to a suitable differential collection site for
electronic and electrical goods or to send it back to the manufacturer if the intention is to
replace it with a new equivalent version of the same product. Suitable differential collection,
environmental friendly treatment and disposal contributes to avoiding negative effects on the ambi-
ent and consequently health as well as favouring the recycling of materials. Illicitly disposing of this
product by the owner is punishable by law and will be dealt with according to the laws and standards
of the individual member nation.
Description
The S486 Radio control system in "FM" consists of one or more transmitters and one or more receivers
which can be combined to meet the specific needs of the system. The generated code is memorised in the
receiver via radio. The receiver is able to memorise up to 300 different codes.
Important: The transmitted code changes for each command (rolling code). If disturbance interrupts the
transmission, the receiver will wait for a different code, the relay can then only be activated by first releas-
ing and then pressing the transmitter channel button again.
10