Weller WXR3003 Traducción Del Manual Original página 25

Parameter menu
Floating switching output 2
Floating switching output 2 is located at the COM 2 port.
Option Description
OFF (factory setting)
CH 1 Tool channel 1 controls the switching output
CH 1+2 Tool channel 1 + 2 controls the switching output
CH 1+2+3 Tool channel 1 + 2 + 3 controls the switching output
Technical Data
Repair station
Dimensions L x W x H
Weight
Mains supply voltage
Power consumption
Safety class
Fuse
Temperature range
Temperature accuracy
Temperature stability
Equipotential bonding
Display
USB port
Pump (Intermittent mode
(30/30) s)
Additional vacuum pump
Notice
If the robot is at working temperature, the display will show – ok –.
WXR 3
273 x 235 x 102 mm
(10,75 x 9,25 x 4,02 inch)
ca. 6,7 kg
230 V, 50 Hz T0053500699
120 V, 60 Hz WXR 3
100 V 50/60 Hz T0053500199
420 W (600 W)
I, antistatic housing
III, Soldering tool
Overcurrent release 230 V; 2,0 A
120 V; 4,0 A
Celsius: 100 - 450°C
Fahrenheit: 200 - 850°F
Controllable temperature range is tool-dependent
± 9 °C (± 17 °F) Tool dependent (WXHAP 200 ±30 °C / ±80 °F)
± 2 °C (± 4 °F)
Via 3.5 mm pawl socket on back of unit
240 x 88 dots / Backlighting
The control unit comes with a USB port for installing firmware updates,
configuration and monitoring.
Max. vacuum 0,7 bar
Max. delivery rate 18 l/min
Max. hot air 15 l/min
Max. vacuum0,5 bar
Max. delivery rate 1,7 l/min
Menu access Station parameters
(550°C)
(999°F)
43