Publicidad
Idiomas disponibles
Idiomas disponibles
Filling/Refilling
NOTE: Tank should be carried using two hands, in the carry handle located on Tank Top and the
other hand supporting the base of the Tank. Manufacturer and Distributor will not accept
responsibility for property damage caused by water spillage.
1.
Remove Tank and turn upside down.
2.
Turn Tank Cap in the direction of the
open lock symbol to remove cap.
3.
Fill Tank with cool water. DO NOT
fill with warm or hot water. DO NOT
ADD ESSENTIAL OILS, MEDICATIONS,
OR INHALANT LIQUIDS such as Vicks VapoSteam to
the Water Tank. Doing so could cause damage to the
humidifier and void the warranty.
4.
Securely replace Tank Cap, aligning arrow
to lock symbol.
5.
Place Tank back on Base.
CAUTION: USE CARE WHEN HANDLING WATER TANK TO AVOID UNNECESSARY IMPACT. BANGING OR
DROPPING THE WATER TANK COULD RESULT IN DAMAGE TO THE TANK THAT WILL CAUSE LEAKING.
Operating Humidifier
1.
Plug the humidifier in. Power on by pressing the power icon. The
unit will default to high output, continuous humidity setting. Press
again to turn off. The humidifier has a memory function and will
revert to the last setting each time you power on.
TO AVOID ELECTRIC SHOCK, DO NOT PLUG HUMIDIFIER INTO
AN OUTLET WITH WET HANDS. Unplugging the humidifier resets
to default settings.
2.
Output: Press the up and down arrows
the low and high mist level settings. A higher setting will deliver
mist into the room at a higher rate. The water level in the Water
Tank will decrease faster on a higher setting, since more moisture is going into the air. A lower setting will
provide less moisture output and run longer before the Water Tank needs to be refilled.
3.
Position humidifier to direct mist output away from walls, furniture and bedding.
4.
Humidity Level: When a comfortable humidity level is reached, lower the output setting. A comfortable humidity
level is between 40-60%.
To monitor your humidity level, use a humidity monitor such as the Vicks V70 or V70-CAN model. (Not included)
If you notice condensation on the walls, windows or around unit, your humidity level is too high.
Turn humidifier off.
NOTE: IF THE POWER ICON
OFF, REFILL AND REPLACE THE TANK AND TURN THE POWER BACK ON TO CONTINUE TO USE THE
HUMIDIFIER.
Step 1
to toggle between
CHANGES TO AN AMBER COLOR, THE TANK IS EMPTY. TURN THE POWER
Step 2
Step 4
Step 1
CAUTION:
Step 3
Step 3
Step 5
Step 2
Step 4
5
Publicidad
