Publicidad
Idiomas disponibles
Idiomas disponibles
13.0 Adjusting Head Support/Harness Straps
When using with built-in harness always
use one of the bottom 4 height positions.
BEFORE adjusting the head support height,
have your child lean forward slightly.
Squeeze the red adjustment handle
on
top of seat and pull head support up until it
snaps into one of the bottom 4 height
positions
.
To lower, squeeze red adjustment handle
and push down.
CHECK to make sure it is securely snapped
into one of the bottom 4 height positions by
pulling up on head support.
The harness straps should be even with or
just above the shoulders as shown by dotted
line
.
40
Publicidad
