Publicidad
Idiomas disponibles
Idiomas disponibles
Regularly check the lubrication of the gearbox and backing
pad rotation shaft.
1. Remove the backing pad and if necessary and grease the
rotating shafts.
Cleaning
After each use, clean all the components of the drywall
sander. Clean the drywall sander with a clean, damp cloth
and blow it out with compressed air at low pressure.
Careful handling protects the power tool and extends its
service life.
Storage
When not in use, store the drywall sander in a dry, clean
place, free of corrosive smoke and out of children's reach.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp: +351 965 157 064
E-mail:
support@vito-tools.com
Publicidad
