Product Specifications; Features - Ryobi RMX001 Manual Del Operador

PRODUCT SPECIFICATIONS

Drum Size ................................................................ 5 cu. ft
Maximum Batch Capacity .....................270 lbs. (2.5 cu. ft)
Motor ....................................................................... 1/2 HP
KNOW YOUR CONCRETE MIXER
See Figure 3.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DRUM - The heavy duty steel drum can be pivoted up or
down depending on your application. It is 5 cu. ft. and spins
at 25 rpm.
HANDLES - The mixer has convenient handles located on
left and right side for adjusting the angle of the drum as well
as moving the mixer.
DRUM
POWER
CORD

FEATURES

BRACKET
PIVOT
PIN
WHEELS
Rating ........................... 120 V~, 60 Hz, AC only, 5.3 Amps
No Load Speed .......................................... 25 r/min (RPM)
Mixing Tines ..............................................Two (22 in. long)
MIXING TINES - The mixing tines are designed to mix thick
and heavy materials.
MOTOR - This machine has a strong motor with sufficient
power to mix up 270 lbs. of cement.
NOTICE:
Do not exceed the batch capacity of this tool. Overfilling
the drum could damage the motor.
ON/OFF SWITCH - There is an easy access switch located on
the rear of the motor assembly for turning the tool on and off.
RUGGED WHEELS - The durable plastic wheels allow you
to move the product across smooth and rough surfaces.
MIXING
TINES
PIVOT
LOCK
HANDLE
FRONT
LEG
8 − English
MOTOR
ASSEMBLY
HANDLES
REAR
LEG
Fig. 3