Filter:
and should be positioned here 99% of the time.
Water is pumped through the sand filter, where it
is cleaned and returned to the pool.
A
Backwash:
clean the sand bed; water is pumped down
through the Collector Hub, upwards through
the sand bed, and deposited out of Port D.
A
Drain:
This function drains water from the pool;
another filter bypass setting, water is pumped and
deposited out of Port D, instead of returning it to
the pool.
A
S-S-005014/21.0x28.5cm/58366EU / 2000gal 欧规砂滤器说明书/JS-YF-2016-B-08884-英
This function is used to filter pool water
C
B
This function is used to
C
D
B
C
D
B
Closed:
flowing between the sand filter and the pool.
A
Rinse:
This function for initial startup,
cleaning, and sand bed leveling after Backwash;
water is pumped downwards through the sand
bed, up through the Collector Hub and deposited
out of the valve Port D.
A
Circulate:
water bypassing the sand filter; use this function
if the filter is broken to collect debris in the Debris
Screens.
A
7
This function stops water
C
B
C
D
B
This function circulates pool
C
B
S-S-005014