Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 6
10
Flush the edge of the back panel with the
bottom edge of the bottom shelf. Align
squarely and nail straight through into back
edges.
systembuild.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
10
Attached the back panel as shown nailing straight into the raw edges.
(x36)
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Assure that the unit is square.
Distance from corner to corner must
be equal as shown.
H
WARNING
Please make sure that the Backs are attached securely.
All nails must be driven into the parts straight and
tightened firmly. Failure to do so could cause instability,
product collapse, and/or serious injury.
AVERTISSEMENT
S'il-vous-plaît assurez-vous que les PANNEAUX
ARRIÈRES sont attachés solidement. Tous les clous
doivent être enfoncés perpendiculairement et solidement
dans les parties. Sinon le meuble peut devenir instable,
s'effondrer subitement et/ou causer des blessures graves.
ADVERTENCIA
Por favor asegúrese que las Parte de atrás se atan
firmemente. Todos los clavos deben manejarse en las
partes recto y deben apretarse firmemente. El fracaso para
hacer para que podría causar inestabilidad, derrumbamiento
del producto, y/o la lesión seria.
13
raw surface
superficie cruda
surface crue
You
Tube
Publicidad
