Sony PWS-110NM1 Manual De Operación página 24

Resetting the Windows
User Password
If you have completely forgotten the password for signing
in to Windows, use the following procedure to reset the
password.
1
Display the sign-in screen for users who have
forgotten their password.
2
Click the [t] button.
A "The password is incorrect. Try again." message
appears.
3
Click [OK].
A [Reset password] text link appears.
4
Insert the USB flash drive on which the password reset
disk data is saved into a USB port of the
PWS-110NM1, and click [Reset password].
5
Click [Use a password reset disk instead].
The [Password Reset Wizard] dialog appears.
6
Click the [Next] button.
7
Select the USB flash drive on which the password
reset disk data is saved, and click the [Next] button.
8
Enter the following, and click the [Next] button.
[Type a new password]: Enter a new password.
[Type the password again to confirm]: Enter the same
password entered in [Type a new password].
[Type a new password hint]: Enter a hint to remind you
of the new password.
9
Click the [Finish] button.
The password is reset, and you can then sign in using
the new password.
24
Resetting the Windows User Password / Usage Precautions
Usage Precautions
Power supply precautions
If the unit is suddenly turned off during operation, data loss
may occur. To maintain data integrity, the use of an
uninterruptible power supply (UPS) is recommended.
To disconnect the power cord or turn off the breaker,
always press the On/Standby button on the unit to stop the
unit before proceeding.
Components with limited lifespan
The fan and battery are consumable parts that will need
periodic replacement.
When operating at room temperature, a normal
replacement cycle will be about 2 to 5 years.
However, this replacement cycle represents only a general
guideline and does not imply that the life expectancy of
these parts is guaranteed. For details on parts replacement,
contact your dealer.
USB device precautions
When using the unit when connected to a self-powered
USB device, the device may not be recognized, depending
on the timing of when the device is turned on. If this
occurs, turn the USB device off and on again, or
disconnect and reconnect the USB cable.
The unit does not support UASP (USB Attached SCSI
Protocol).
Precautions for network-enabled devices
Depending on the operating environment, unauthorized
third parties on the network may be able to access the
system.
We strongly recommend configuring all of the passwords
for security purposes.
Configure all the passwords following the procedure on
page 20.
From a safety standpoint, when using the unit connected
with the network, it is strongly recommended to access the
Control window via a Web browser and change the access
limitation settings from the factory preset values
(page 21).
Also, it is recommended that you set a password with a
sufficiently long character string that is hard to guess by
others, and that you store it safely.
Do not browse any other website in the Web browser while
making settings or after making settings. Since the login
status remains in the Web browser, close the Web browser
when you complete the settings to prevent unauthorized