Beko BFSB3622SS Manual Del Usuario página 10

Installation
3.3. Adjusting the stands
If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.
In order to adjust the doors vertically,
•Loosen the fixing nut at the bottom
•Screw adjusting nut (CW/CCW) according to the
position of the door
•Tighten the fixing nut for the final position
In order to adjust the doors horizontally,
• Loosen the fixing bolt on the top
• Screw the adjusting bolt (CW/CCW) on the side
according to the position of the door
• Tighten the fixing bolt on the top for the final
position
adjusting nut
Refrigerator / User Guide
3.4. Power connection
A
B
C
• Our firm will not assume responsibility for any
• The power cable plug must be easily
• Connect the product to an earthed socket with
• Do not use multi-group plug with or without
adjusting nut
fixing nut
fixing nut
9 /30 EN
WARNING:
multi sockets in power connection.
WARNING:
must be replaced by Authorized
Service.
When placing two coolers in adjacent
position, leave at least 4 cm distance
between the two units.
damages due to usage without earthing and
power connection in compliance with national
regulations.
accessible after installation.
120 V/60 Hz voltage. The plug must comprise
a 10-13 A fuse.
extension cable between the wall socket and
the refrigerator.
Do not use extension or
Damaged power cable