Publicidad
Idiomas disponibles
Idiomas disponibles
RF CHARACTERISTICS
Wireless Modules
EU: UHF***(863-870 MHz)
USA: UHF (917-922.20 MHz)
AUS: UHF (922.30-927.50 MHz)
SGP: UHF (920.50-924.50 MHz)
KOR: UHF (917.9-921.5 MHz)
RUS: UHF (868.75-869.12 MHz)
JPN: UHF (922.80-926.40 MHz)
CRMX (2402-2480 MHz)
Bluetooth 5.0 LE
(2402-2480 MHz)
WiFi (2412-2472 MHz)
*** General allocation of frequencies for use by short-range radio applications
Spectrum usage regulations:
Frequency range in
MHz
1)
865 - 868
868,0 - 868,6
868,7 - 869,2
869,40 - 869,65
869,7 - 870,0
The use of adjacent frequency bands within this table as a single frequency band is permitted, provided that the
1)
specific conditions for each of these adjacent frequency bands are met.
„duty cycle" means the ratio of (T
2)
device and ‚T
' is the observation period T
obs
specified in this general allocation, T
this general allocation (table).
Frequency access and interference mitigation techniques shall be used whose performance level at least meets
3)
the essential requirements of Directive 2014/53/EU or the Radio Equipment Act (FuAG). Where relevant techniques
are described in harmonized standards, the references of which have been published in the Official Journal of the
European Union pursuant to Directive 2014/53/EU, or parts thereof, performance shall be ensured which is at least
equivalent to those techniques.
Maximum equivalent
radiant power (ERP)
25 mW
25 mW
25 mW
500 mW
25 mW
)/(T
) expressed as a percentage, where ‚T
on
obs
is measured in an observation frequency band (F
on
is a continuous period of one hour and F
obs
Modulation
FHSS
FHSS
FHSS
FHSS
FHSS
FHSS
FHSS
FHSS
FHSS
DSSS, OFDM
Additional parameters / frequency access and interference
Requirements for frequency access and mitigation
techniques
3)
Alternatively, a maximum duty cycle
be used.
Requirements for frequency access and mitigation
techniques
Alternatively, a maximum duty cycle
3)
be used.
Requirements for frequency access and mitigation
techniques
Alternatively, a maximum duty cycle
3)
be used.
Requirements for frequency access and mitigation
techniques
Alternatively, a maximum duty cycle
3)
be used.
Requirements for frequency access and mitigation
techniques
Alternatively, a maximum duty cycle
3)
be used.
~ 17 ~
ERP
(Transmitter)
< 25 mW
< 25 mW
< 25 mW
< 25 mW
< 25 mW
< 25 mW
< 25 mW
< 100 mW
10 mW (BLE)
< 100 mW
mitigation techniques
' is the ‚on-time' of a single transmitting
on
is the applicable frequency band in
obs
Channel
Count
47
53
53
41
10
6
19
79
40
13
2)
of 1% can
of 1% can
2)
of 0.1% can
2)
of 10% can
2)
of 1% can
2)
). Unless otherwise
obs
Publicidad
