Astera PlutoFresnel Manual Del Usuario página 3

English
SCOPE OF DELIVERY
1 x PlutoFresnel (AF80)
1 x Fresnel Lens for PlutoFresnel (AF80-FL)
1 x Barndoor for PlutoFresnel (AF80-BD)
1 x Yoke for PlutoFresnel (AF80-YK)
2 x YokeBase for PlutoFresnel (AF80-YKB)
1 x TVMP Adapter (AX-TVMP)
1 x TrackHandle (AX-THD)
1 x Waterproof Protection Cover (PB15-PLG)
1 x User Manual
INTRODUCTION / INTENDED USE
The PlutoFresnel from ASTERA is a LED Fresnel for professional use in the event
and film industry. The PlutoFresnel is designed for direct or indirect illumination
of objects and people. Due to its built-in battery it can be quickly set up at places
where traditional lights cannot be mounted easily. It has the Titan LED Engine
and offers excellent color and light qualities. The PlutoFresnel generates white
or colored light and the color temperature can be adjusted in many ways. It can
be controlled with the AsteraApp or with wired DMX or wireless CRMX. It is also
possible to view and change settings via wireless RDM. The fixture can also be
controlled by the integrated display or by infrared remote control. Thanks to its
built-in Bluetooth it can be used as BluetoothBridge (BTB).
The PlutoFresnel can be used standing or hanging. For this purpose, the device is
equipped with AirlineTracks to attach the appropriate mounting accessories. The
PlutoFresnel can be used indoors and outdoors and has an IP55 rating.
Do not shake the device. Avoid brute force when installing or operating the
device. When choosing the installation spot, please make sure that the device is
not exposed to extreme heat or dust. Avoid direct sunlight for longer periods of
time. The specified ambient temperature must be maintained. Keep away from
direct insulation (particularly in cars) and heaters. Never use the device during
thunderstorms connected to the power mains. Over voltage could destroy the
device. Always disconnect the device during thunderstorms. Make sure that the
area below the installation place is blocked when rigging, derigging or servicing
the fixture. Always fix the fixture with an appropriate safety wire.
Operate the device only after having become familiarized with its functions. Please
consider that unauthorized modifications on the device are not allowed due to
safety reasons! If this device is operated in any way different from what is described
~ 3 ~