Descargar Imprimir esta página

NUTOOL KGS2000TS Traducción De Las Instrucciones Originales página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

ELECTRICAL INFORMATION 5Amp Class 1 Protection
Electrical information
CONNECTION OF THE MAINS PLUG
CONNECTION OF THE MAINS PLUG
Important! The wires in the mains lead fitted to this product are coloured in accordance with the following
Important! The wires in the mains lead fitted to this product are coloured in accordance with the following code:
code:
If for any reason the 13 amp plug fitted to this product requires replacement it must be wired in accordance with the following
If for any reason the 13 amp plug fitted to this product requires replacing it must be wired in accordance
instruction:
with the following instruction:
DO NOT CONNECT THE BROWN LIVE OR BLUE NEUTRAL TO THE EARTH PIN MARKED 'E'
Do not connect the brown live or blue neutral to the earth pin MARKED E
PIN PLUG.
on the 3 pin plug.
Connect the Blue wire to the terminal marked Neutral (N). Connect the Brown wire to the terminal marked
Connect the Blue wire to the terminal marked Neutral (N). Connect the Brown wire to the terminal marked Live (L). Connect the Green
Live (L). Connect the Green and Yellow wire to the terminal marked Earth E.
and Yellow wire to the terminal marked Earth (E) . Ensure that the outer insulation is gripped by the cord grip and that the wires
are not trapped when replacing the plug cover. The mains lead on this product is fitted with a 13 amp (BS1363/A) plug. A 5 amp
insulation is gripped by the cord grip and that the wires are not trapped when replacing the plug cover. The
(BS1362) fuse must be fitted in the plug.
mains lead on this product is fitted with a 13 amp (BS1363/A) plug. A
the plug. If in doubt consult a qualified electrician.
IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN
There are no user serviceable parts inside this product except those referred to in the manual. Always refer servicing to qualified
There are no user serviceable parts inside this product except those referred to in the manual. Always refer
service personnel. Never remove any part of the casing unless qualified to do so; this unit contains dangerous voltages.
servicing to qualified service personnel. Never remove any part of the casing unless qualified to do so; this
WARNING!
unit contains dangerous voltages.
For your protection if this product is to be used outdoors, it should not be exposed to rain or used in damp locations. Do not place
the product on damp surfaces, use a workbench if available. For added protection use a suitable residual current device (R.C.D.) at
WARNING!
the socket outlet.
For your protection if this tool is to be used outdoors, do not expose it to rain or use it in damp locations. Do
If an extension cable is to be used with this machine, it must be of 3 core construction with the earth conductor connected at both the
plug and socket. If in dubt, consult a qualified electrician.
not place the tool on damp surfaces, use a workbench if available. For added protection use a suitable
residual current device (R.C.D.) at the socket outlet.
If an extension cable is to be used with this machine it must be of 3 core construction with the earth
conductor connected at both the plug and socket. If in doubt consult a qualified electrician.
5Amp
Class 1 Protection
13
25
Brown: Live (L) or Red
Brown: Live (L) or Red
Blue: Neutral (N) or Black
Blue:
Neutral (N) or Black
Green and Yellow or Green: Earth (E)
Green and Yellow or Green: Earth (E)
THIS PRODUCT REQUIRES A CONNECTION TO
THIS PRODUCT REQUIRES A CONNECTION TO EARTH.
THE 3 PIN PLUG MUST COMPLY TO BS1363/A.
EARTH. THE 3 PIN PLUG MUST COMPLY TO BS1363/
THE FUSE MUST COMPLY TO BS1362.
A. The FUSE MUST COMPLY TO BS1362.
Ensure that the outer
5 amp
(BS1362) fuse must be fitted in
GB
GB
ON THE 3

Publicidad

loading