Gewiss CHORUS GW 13 752 Manual Del Usuario página 21

PROGRAMMING WITH THE EASY BASE UNIT
4.
By assembling the push-button panel with the rear programming LED at the
bottom, the correspondence between the buttons and the channels during the
programming with the Easy base unit is illustrated in Figure C.
Programming the buttons through the Easy base unit (code GW 90 831).
Each button to be programmed can be selected, at choice:
• by pressing the button: the corresponding channel will be highli-
ghted in the channel list in the "Application → New function" or
"Application → Edit function" menu;
• directly from the list of channels of the "Application → New function" or
"Application → Edit function" menus.
To select the status LEDs (for edge management) select the status chan-
nels from the "Application → New function" or "Application → Edit function"
menus.
The correspondence between the status LEDs and the numbering of the sta-
tus channels is illustrated in Figure
La corrispondenza tra i LED di stato e la numerazione dei canali di stato è
mostrata nella figura D.
The functions can be created after the devices have been selected.
21