Gewiss CHORUS GW 13 752 Manual Del Usuario página 23

4.1 CONFIGURATION PARAMETERS (EASY)
After creating the desired function, it is possible to configure the device function
parameters from the "Application → Parameters" menu.
The parameters available, in relation to the function created, are listed in the
following table.
The underlined value is the default value.
Function: edges
Parameter: Edge function
on/off
off/on
on
off
Function: scene
Parameter: scene number
1 activation of scene 1 (prolonged closure: memorising of the scene)
2 activation of scene 2 (prolonged closure: memorising of the scene)
3 activation of scene 3 (prolonged closure: memorising of the scene)
4 activation of scene 4 (prolonged closure: memorising of the scene)
5 activation of scene 5 (prolonged closure: memorising of the scene)
6 activation of scene 6 (prolonged closure: memorising of the scene)
7 activation of scene 7 (prolonged closure: memorising of the scene)
8 activation of scene 8 (prolonged closure: memorising of the scene)
Function: dimming
Parameter: pushbutton function
up
Increases light intensity, ON
down
decreases light intensity, OFF
Function: blinds
Parameter: pushbutton function
up raising of blinds, regulation of laths
down lowering of blinds, regulation of laths
ON when closed, OFF when open
OFF when closed, ON when open
on
off
23