Specifications - Hitachi Koki CS 40EA Instrucciones De Manejo

Ocultar thumbs Ver también para CS 40EA:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Transport and storage
○ Carry the unit/machine by hand with the engine stopped and the
muffl er away from your body.
○ Allow the engine to cool, empty the fuel tank, and secure the
unit/machine before storing or transporting in a vehicle.
○ Empty the fuel tank before storing the unit/machine. It is
recommended that the fuel be emptied after each use. If fuel is
left in the tank, store so fuel will not leak.
○ Store unit/machine out of the reach of children.
○ Clean and maintain the unit carefully and store it in a dry place.
○ Make sure engine switch is off when transporting or storing.
○ When transporting or storage, cover chain with chain cover.

SPECIFICATIONS

○ Code "CS" of model name means "Chain saw"
Type of equipment
Engine Size (cm
)
3
Spark Plug
Fuel Tank Capacity (cm
)
3
Chain Oil Tank Capacity (cm
Dry Weight (kg)
(Without guide bar and chain)
Guide bar length (mm)
Chain pitch (mm)
Chain gauge (mm)
Sound pressure level LpA (dB (A))
by ISO 22868
Sound power level LwA (dB (A))
by ISO 22868
Sound power level LwA (dB (A))
by 2000/14/EC
Vibration level (m/s
)
2
by ISO 22867
Front handle
Rear handle
Max. engine power
by ISO 7293 (kW)
Max. engine speed (min
)
-1
Idle engine speed (min
)
-1
Specifi c fuel consumption (g/kWh)
Type of chain
Max. chain speed (m/sec)
Sprocket (number of teeth)
NOTE: Equivalent noise level/vibration levels are calculated as the time-weighted energy total for noise/vibration levels under various
working conditions with the following time distribution: 1/3 idle, 1/3 full, 1/3 racing speed.
* All data subject to change without notice.
Declared single-number noise emission values are the sum of measure values and the associated uncertainty of 3dB and they
represent upper boundaries of the range of values which is likely to occur in measurements.
Model
CS40EA (33S)
)
3
330
If situations occur which are not covered in this manual, take care
and use common sense. Contact Hitachi Authorized Service
Centers if you need assistance. Pay special attention to statements
preceded by the following words:
WARNING
Indicates a strong possibility of severe personal injury or loss of
life, if instructions are not followed.
CAUTION
Indicates a possibility of personal injury or equipment damage, if
instructions are not followed.
NOTE
Helpful information for correct function and use.
CS40EA (38S)
CS40EA (40S)
Chain saw, portable
39.6
NGK BPMR-7A
380
240
4.4
380
8.26
1.27
103
113
114
2.2
3.2
1.8
13000
3000
480
95VPX/95VP
(Oregon)
25.1
7
English
CS40EA (45S)
400
450
9

Publicidad

Tabla de contenido
loading

Tabla de contenido