Publicidad
Idiomas disponibles
Idiomas disponibles
COMBO FAN
HOW TO USE
1.Before using, ensure that the product is not damaged. Check if the voltage
indicated on the device corresponds to the voltage in your house. Once
you connect plug to power source, you will hear a beep sound. After a few
seconds, the display and the indicator light will be switched on and the fan
enters into standby mode.
2.Power on
When the fan is at rest, press the switch. You will hear a beep sound twice,
then the fan starts working at low power. Now, you can select the speed mode
pressing the corresponding button on the control panel or on the remote
control. 3. Speed adjustment
3.After starting the fan, you can adjust the volume of airflow by lightly pressing
the "Speed" button placed on the control panel where there is the part related
to the functions. You can select three types of speed: low, medium and high.
The corresponding air circulation mode can be adjusted on the control panel.
4.Left and right movement adjustment
Press the "Oscillation" button on the control panel or on the remote control
to turn on the self-winding movement to the right and left to improve air
circulation in the room. Press again the button to disable this function.
5. Swing adjustmen
Press the "Swing" button on the control panel or on the remote control to turn
on the automatic swinging mode that works in a circular direction to improve
air circulation in the room. Press again the button to disable this function.
6. Ionization function
When the fan is on, lightly press the "Ion" button to turn on this function. The
corresponding symbol will light up on the control panel. Press again the button
to disable this function.
7. Moistening/misting function
When the fan is on, press the "Mist" button on the control panel or on the
remote control, the display will show the diagram of the moistening function.
The green light indicates the normal moistening function, while the red light
warns you that there is not enough water in the tank and that it must be filled.
Press again the "Mist" button to disable this function.
8. Mosquito function
When the fan is on, press the "Mosquito" button, the display will show the
9
Publicidad
