- Pull out the mains plug before emptying the collecting baskets, cleaning the device or
if the device is not going to be used for a long time.
- If the mains cable, mains plug or the device itself is damaged do not operate the de-
vice any longer (danger of injuries).
- Do not overload the recommended capacity of the mains socket.
- Do not make any alterations to the mains cable as it has been designed for the speci-
fied mains voltage.
The PS 45 CCD shredder may only be used to shred paper, CDs or credit cards in the
infeed slots provided. The material to be shredded must be dry and must correspond
to the specifications listed in the technical data. Shredding other materials can lead to
injuries (for example, if solid material splinters) or damage to the device (destruction of
the cutting unit, etc.).
Do not shred endless paper documents with this device. Remove all paper clips and
staples before feeding paper into the device.
The device may only be used indoors in dry rooms.
2) Selector Switch
AUTO:
OFF:
REV:
ON CD:
1) Paper feed ope-
ning/credit card
Electrical safety guidelines
Intended use
Parts and function
the shredder is ready to work
the shredder stops
the shredder reverses the paper when
you move the switch to this position
the shredder is ready to work
3) Power indicator
4) CD feed opening
5) Power cord
6) CD waste bin
7) Waste bin
1) Paper feed opening/credit card
2) Selector switch
AUTO:
the shredder is ready to work
OFF:
the shredder stops
REV:
the shredder reverses the
paper when you move the
switch to this position
ON CD:
the shredder is ready to work
3) Power indicator
4) CD feed opening
5) Power cord
6) CD waste bin
7) Waste bin
14