Olympia PS 45 CCD Instrucciones De Uso página 16

The motor switches off automatically in the event of overloading. Pull out the mains plug
from the socket and allow the motor to cool down to room temperature. Plug the mains
cable back in and then continue operation.
Caution:
Maintenance work may only be performed when the mains plug is pulled out.
Clean the housing with a slightly moist cloth.
Do not use any aggressive cleaning agents. Never use any chemicals (e.g. cleaning
solvent, alcohol) to clean the housing.
To ensure your shredder enjoys a long working life, we recommend to clear residual ma-
terial from the cutting units at regular intervals and apply special oil for paper shred-
ders to the cutting unit. You can purchase a special CFC-free oil from your specialist
retailer or directly from our Service Center in Hattingen. This will extend the service life
of the device.
Attention: It is forbidden to use oil spray bottles containing CFC!
Model:
Power supply:
Cutting width of the paper slot:
Cutting width of the CD slot:
Cutting power:
Shred size:
Shred speed:
Waste bin volume:
Noise level:
Security level:
Max. power consumption:
Size (W x H x D):
Weight:
Operating cycle paper/credit card:
Operating cycle CD:
Motor protection
Notes on care and maintenance
Technical data
PS 45 CCD
230 V/50 Hz
220 mm
120 mm
10 DIN A4sheets (80 g/m²); 1 CD, 1 credit card
4 x 35 mm
2.5 m/min
21 l (0.8 l for CD bin)
approx. 72 dB
3
1.6 A
360 x 244 x 400
5 kg
Intermittent operation 3 min. on / 40 min off
Intermittent operation 3 min. on / 40 min off
16