Publicidad
Idiomas disponibles
Idiomas disponibles
Install the backrest. Insert the handles. Please make sure that the backrest is correctly inserted into the frame and
lock it. Then insert the push bar and lock it.
Check the attachment of all components for correct and safe assembly.
Check the attachment of the armrests, the attachment of the footrests, the attachment of the handles and the
attachment of the push bar.
Check that the 2 side brakes can be used correctly.
If there is a seat belt and leg support, use them.
To fold and unfold the chair
1. Raise the footrests to the upright position.
2. The push bar must be lowered or removed.
3. Grasp the seat cover with both hands in the middle and lift it up.
4. Place your hand on top of the seat bar. Press down on the bar until the wheelchair is fully open and ready to sit
down.
Version Mai 2023
*
Raise the lock to assemble the backrest.
Lower the lock to secure the backrest.
Insert the push bar
* The push bar has 2 fixing rings. Rotate them for
left and right attachment
18
Publicidad
