Wabi Baby WA9900N-PT Manual Del Usuario página 7

Esterilizador y secador uv de doble función y control táctil
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Step 1
Place your Wabi Baby UV Sterilizer & Dryer on a level and a flat surface.
Do not place the appliance where there is a risk of falling. Remember to keep the
5 INCH
appliance at least five inches from the back wall to allow proper air.
Step 2
It is common to have a slight unpleasant smell like plastic initially, you may leave
the door open to ventilate the interior before use. The smell is harmless and does
not affect the function of the appliance.
Step 3
Check for any lamp or interior damage during transit. Please contact us immediately
or return to the retailer if you notice any damage to the appliance. For broken UV
lamps, please contact us immediately at www.wabibaby.com/contact.
Step 4
Use a clean damp towel, and wipe down the interior space. Rinse the wired
shelve and basket quickly, and wipe dry before assembly.
Step 5
Assemble the shelf tray on the top of the shelf studs and place the basket
at the bottom.
Step 6
Connect the power cord to the appliance and plug it into the power
outlet following the safety instructions outlined in the Safeguards section.
You should hear a start-up chime once connected.
5

Publicidad

Tabla de contenido
loading

Productos relacionados para Wabi Baby WA9900N-PT

Tabla de contenido