Editing and Setting Channels
The current channel settings can be changed according to your needs and reception conditions.
1
2
■
Press to exit
Automatically searches and adds active channels to memory.
Select "ANT in"
Auto program
ANT in
Start scan
Auto program
Set
automatically
•
All previously memorized channels are erased.
•
When
viewing. (Channels searched up to that point are added.)
•
After Auto program finishes, the lowest channel number added will be displayed.
•
When there is no receivable channel, channel 69 (forTV) or channel 125 (for cable TV) is
displayed.
Use this procedure when changing the setting of receiving channels or changing the channel
display.
Select Channel
Manual program
Manual program
Enter channel
Set
manually
•
If "Channel lock" (p. 16) is activated and "Auto" or "Manual" is selected, "Enter password." will be displayed.
Display menu
Select "Setup"
Menu
Picture
Audio
Lock
Setup
(Select Cable or Antenna)
Cable
Note
or
button is pressed during Auto program, the TV will return to normal
7
Select "Program channel"
3
Setup
Language
Program channel
Input labels
CC
Other adjust
Select the function
4
next
Program channel
Auto program
select
Manual program
Set
5
Select "Start scan"
Auto program
ANT in
Start scan
set
start
select
select
Add or delete
select
add
(the channel number turns blue)
delete
(the channel number turns yellow)
•
Repeat steps
next
select
next
select
Cable
Settings are made
automatically
and
for other channels.
15