HoMedics BMSC-6000H-EU Manual De Instrucciones página 3

PRODUCT FEATURES:
1
2
3
4
5
6
@
1–Demo Button - For a brief demonstration of
the features of the Shiatsu One Massage Cushion,
press the Demo button. The unit will briefly go
7
through each function. Once complete, the unit
automatically turns off. The L.E.D. light will blink to
indicate the active functions.
You may adjust the massage position in the
shoulder area by holding down either the Up or
Down button till the desired position is reached.
2–Vibration Massage
- Add invigorating
vibration massage to any shiatsu or rolling massage
program.
3–Shoulder Massage - To turn on the
8
massage in the shoulders, simply press the Shoulder
button and the LED light will illuminate. To
deselect, press the button again.
Note: By pressing up/down arrows, when in use,
you can adjust the shoulder massage mechanism
position to your personal comfort level.
4–Shoulder Position Adjustment ts - Once
the shoulder massage function is on, you may
adjust the massage position in the shoulder area by
holding down either arrow button until the desired
position is reached. The Up Arrow will move the
mechanism up and the Down Arrow will move it
down. Once you release the button, the mechanism
9
will stop in that place.
Shiatsu Massage - Shiatsu is a deep kneading
circular massage.
0
5–Shiatsu Programs for the Back
Choose from 3 preset programs where the Shiatsu
massage travels up and down in a specific area of
the back. To select a program, simply press the
button and the LED will illuminate. To deselect,
press the button again or press another button.
!
= Full Back
= Upper Back
= Lower Back
6–Spot Shiatsu for the Back
unit is in Shiatsu massage for the back, press either
button to stop and focus the Shiatsu action in one
place. Once the unit is operating in Spot Shiatsu,
you may adjust the mechanism position by holding
down either button until the desired position is
reached. The Up Arrow will move the mechanism
3
upwards and the Down Arrow will move it down.
Once you release the button, the mechanism will
stop in that place.
–Heat - For soothing heat when massage
7
is on, simply press the heat button and the
corresponding red LED light will illuminate.
To deselect, press the button again and the
corresponding LED light will turn off. Heat is
available in both the back & shoulder areas, which
are controlled separately. For your safety, heat
cannot be turned on if the corresponding massage
program is not on.
8–Rolling Programs for the Back
from 3 preset programs where the Rolling massage
travels up and down in a specific area of the back.
To select a program, simply press the button and
the LED will illuminate. To deselect, press the
button again or press another button.
9–Width Adjustment
in Rolling massage for the back, press this button to
adjust the distance or width between the massage
heads. With each press, the massage heads will
move to the next available position.
0–Vibration Massage
vibration massage to any shiatsu or rolling massage
program.
- See above
!–Heat
@–Power Button
press the POWER button. The LED indicator will
-
illuminate and confirm your selection. To turn
off the unit, simply press the button again. The
LED indicator will blink while the back massage
mechanism returns to its lowest point and then it
will turn off.
NOTE: There is a 15-minute auto shut off on the
unit for your safety.
NOTE: The moving dual massage mechanism on
- While the
the back always "parks" or finishes in its lowest
position. It will continue to this position after
the power has been turned off. If the electrical
supply is interrupted, when power is restored,
the mechanism will "park" or move to its lowest
position.
- Choose
- While the unit is
- Add invigorating
- To turn on the unit, first