minimizes the risk of kickback and lets you keep the
product under control. Do not let go of the handles!
•
Never use the product above shoulder height.
•
Do not use the product in a situation where you
cannot call for help in case of an accident.
•
Before moving your product, switch off the engine
and lock the saw chain using the chain brake. Carry
the product with the guide bar and saw chain
pointing backwards. Fit a transportation guard to the
guide bar before transporting the product or carrying
it for any distance.
•
When you put the product on the ground, lock the
saw chain using the chain brake and ensure you
have a constant view of the product. Switch the
engine off before leaving your product for any length
of time.
•
Sometimes chips get stuck in the clutch cover
causing the saw chain to jam. Always stop the
engine before cleaning.
•
Running an engine in a confined or badly ventilated
area can result in death due to carbon monoxide
poisoning.
•
Use the chain brake as a parking brake when you
start the product and when you move short
distances. Always carry the product in the front
handle. This decreases the risk that you or a person
near you get hit by the saw chain.
•
It is not possible to cover every conceivable situation
you can face when using this product. Always
exercise care and use your common sense. Avoid all
situations which you consider to be beyond your
capability. If you still feel uncertain about operating
procedures after reading these instructions, you
should consult an expert before continuing. Do not
hesitate to contact your dealer or RedMax if you
have any questions about the use of the product. We
will willingly be of service and provide you with
advice as well as help you to use your product both
efficiently and safely. Attend a training course in
chainsaw usage if possible. Your dealer, forestry
6
school or your library can provide information about
which training materials and courses are available.
•
When using this product, a fire extinguisher should
be available.
•
Keep handles dry, clean and free from oil.
•
Beware of carbon monoxide poisoning. Operate the
product in a well ventilated area only.
•
Do not attempt a pruning or limbing operation in a
standing tree unless specifically trained to do so.
Personal protective equipment
WARNING: Read the warning instructions
that follow before you use the product.
•
Most chainsaw accidents occur when the saw chain
touches the operator. You must use approved
personal protective equipment during operation.
Personal protective equipment does not give you full
protection from injuries but it decreases the degree
of injury if an accident occurs. Speak to your
servicing dealer for recommendations about which
equipment to use.
•
Your clothing must be close-fitting but not limit your
movements. Regularly do a check of the condition of
the personal protective equipment.
•
Use an approved protective helmet.
•
Use approved hearing protection. Long-term
exposure to noise can result in permanent damage
to the hearing.
•
Use protective glasses or a face visor to decrease
the risk of injury from thrown objects. The product
can throw objects, such as wood chips, small pieces
of wood and more, at large force. This can result in
serious injury, especially to the eyes.
•
Use gloves with saw protection.
•
Use pants with saw protection.
1515 - 001 - 01.07.2020