Publicidad
Idiomas disponibles
Idiomas disponibles
STEP 14
8
8
raw surface
B
ameriwoodhome.com
IMPORTANT! THE BACK PANELS ARE A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
With the help of another person, turn the unit over on its front side.
(x32)
Position back panels as shown. Align squarely with outer edges.
Attached the back panels as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal.
M
raw surface
C
F
Make sure edge of back panel is
flush with bottom edge of the
bottom (F).
21
M
You
Tube
Publicidad
