Publicidad
Idiomas disponibles
Idiomas disponibles
with strong condensation. No basin with water must be placed near or on top of the projector.
• Before cleaning the product, please disconnect the power cable from the mains: refer to the next
chapter for the relative prescriptions.
• There are no serviceable parts inside: do not dismantle. Any repair or technical verification must be
carried out by technical people only. Dismantling the unit will invalidate the guarantee and can be
dangerous for the user.
• If installed on the ceiling, pay special attention at the quality of bracket fixing to the ceiling and the
projector; verify the masonry as well the tightening of anchors and screws. A poorly executed
installation can lead to the fall (and damage) of the appliance, with possible injury, even serious, to
people.
• Also check that the projector installation will not obstruct the windows or doors opening and that, in
ceiling installation, the lower part of the projector will be at a minimum height of 2.50m from the floor.
• The projector installation must not be an obstacle for moving elements as split air conditioners or
ceiling fan: also avoid to place the unit along the air flow line generated by them, nor in the proximity
of lamps, spot lights or other lighting devices, especially if they produce a strong heating, nor along
the luminous flux line generated by them.
• Please avoid connecting the projector to controlled sockets, timers, electromechanical actuators,
power strips, multisocket adapters and electrical extension.
• Do not insert any metal object in the air or sound emission holes, nor in the signal connectors: only
the appropriate connector must be used. Do not block the ventilation slots.
• Do not use the projector for any purpose other than exactly that described in this manual; the
intended use is residential, the projector is not suitable for intensive professional use.
• Do not leave the projector unattended during operation.
21
Publicidad
