Irradio VDP-IR7000HDW Manual De Instrucciones página 28

7. INPUT SELECTION
To select the desired signal input, press repeatedly the "Source" key on the command keyboard (chap.
4 n. 19) or on the remote control (chap. 4 n. 9) until the desired source appear on the menu, as
described below:
HDMI1 High definition input, up to 1080P, with HDMI1 connector located on the left side, to
connect an HDMI M-M 19 pin cable coming from HD decoder, DVD or blue-ray
player, game console, PC, etc.
HDMI2 High definition input, up to 1080P, with HDMI2 connector located on the left side, to
connect an HDMI M-M 19 pin cable coming from HD decoder, DVD or blue-ray
player, game console, PC, etc.
Screen External source connection mode (smartphone or tablet) using wireless and
sharing "Duplicate screen " (IOS) or Smart Wiew (Android) function. For connection mode,
view the next chapter.
AV
Analog input with minijack RCA adapter (included), to connect a Scart-RCA or
RCA-RCA cable coming from analog cameras, VHS video recorders, laser discs, etc.
RCA yellow socket=CVBS PAL video signal, RCA red socket=audio left channel
signal, RCA white socket=audio right channel signal.
USB1
USB pendrive input with stored multimedia contents as video and audio files, images
and texts of different formats. For compatible formats, refer to the next chapter
"Technical data".
USB2
USB pendrive input with stored multimedia contents as video and audio files, images
and texts of different formats. For compatible formats, refer to the next chapter
"Technical data".
After selecting the sources HDMI1, HDMI2 or AV, press the "OK" button on the control keyboard or
remote control: the projector immediately connects the source, displays the image and reproduces the
audio from the internal speaker or from the device connected to the headphone output jack.
27