Setting The Limits; Performing Settings - testo 623 Manual De Instrucciones

6 Using the product
Pos: 27 /TD/Produkt verwenden/testo623/testo 623 Grenzwerte einstellen @ 4\mod_1254828443945_79.doc @ 51445 @ 255
6.2.
Pos: 28 /TD/Produkt verwenden/testo623/testo 623 Einstellungen vornehmen neu @ 4\mod_1248956306675_79.doc @ 46623 @ 2
3.
6.3.
info@Testo-Direct.com
32

Setting the limits

Temperature
When changing the temperature unit from °C to °F, the set limit
values are converted
Humidity
When changing the humidity unit (%, td, wb), the set limit values
are not converted. The limit values must be reset via the Setup
menu.

Performing settings

1. Press and hold
> Display flashes.
2. Select the required function with [Set].
> The adjustable parameter flashes.
3 Set values with
settings, see following table).
To scroll rapidly forward and back, press and hold
►
].
Press [Esc]
Hold [Set] down for 2 s to save previously set values and
return to the current reading display.
If the entire Setup menu is run through, the settings made
are automatically stored.
If no key is pressed within 30 s, the screen reverts to the
current reading display automatically. No settings are
saved.
- Instrument changes to the next display function
www.
[Set] for 2 s.
◄ ►
[ ]or [ ] and confirm entry with
to cancel settings without saving them.
Testo-Direct
[Set] (for
◄
[
or
1.888.475.5235
.com