Publicidad
Idiomas disponibles
Idiomas disponibles
DESCRIPTION
Hold any key pressed to activate the keypad: a long beep
signals its successful activation.
Press and hold the
beep is emitted and until the keypad lighting remains blue
Key in the master code followed by the
Press
NOTE - the set number of digits is maintained:
3 digits = 1 2 3; 4 digits = 1 2 3 4; 5 digits = 1 2 3 4 5; 6 digits = 1 2 3 4 5 6
7 - RESTORING THE DEFAULT PARAMETERS
This operation restores all parameters, including the master code, to their default values. Any pairing
with the receiver is also lost and must be repeated.
Remove the selector from the wall support, unscrewing the
screws on the bottom
Activate the digital keypad by touching any key
Within 5", using a small, thin stick (maximum diameter 1 mm),
press and hold (approx. 3'') the P key on the back of the keypad
until the colour tuns YELLOW and a long beep is emitted
After the acoustic signal, the keypad sends its own unique code for 35". After this time, saving in the
receiver is possible.
All parameters and even the password will now be restored to their default values.
8 - DISPOSAL
Packaging components (cardboard, plastic, etc.), properly separated, must be placed in the appropriate
bins. The components of the device such as electronic boards, metal parts, batteries, etc., must be
separated and recycled.
For disposal methods, the rules in force at the place of installation must be applied.
DO NOT DISPERSE IN THE ENVIRONMENT!
and
keys simultaneously until a long
EXAMPLE COLOUR
key
BLUE
+
5 sec.
BLUE
max
1 2 3 4
ORANGE
GREEN
BLUE
YELLOW
BEEP
> 1 s
> 1 s
+
> 1s
+
> 1s
> 1 s
> 1 s
11
Publicidad
