Velleman ED31165 Manual Del Usuario página 6

• Press ALARM to return to normal display mode.
• In the HI alarm mode, press SET to select the following modes: Time alarm (h / m) – Indoor humidity HI
alarm – Indoor temperature HI alarm – Outdoor humidity HI alarm – Outdoor temperature HI alarm –
Pressure HI alarm.
• In the LO alarm mode, press SET to select the following modes: Time alarm (h / m) – Indoor humidity LO
alarm – Indoor temperature LO alarm – Outdoor humidity LO alarm – Outdoor temperature LO alarm –
Pressure LO alarm.
• In both alarm modes, press + or MIN / MAX to modify the alarm value. Hold + pressed for 3 seconds to
modify the value rapidly. Press ALARM to switch the alarm on or off (if the alarm is enabled, the speaker
icon will appear on the display). Press SET to confirm the settings. Press SET to scroll through the setting
options and to return to the normal display mode.
• Press SNOOZE / LIGHT to return to the normal display mode.
Cancelling the temperature alarm while sounding
• When a set weather alarm condition has been activated, that particular alarm will sound and flash for 120
seconds. Press any key to mute the alarm. If the alarm is activated again within 10 minutes, the alarm will
not sound but will continue to flash until the weather conditions have become stable. This feature is useful
to avoid repeated triggering for the same value.
• The alarm will automatically reactivate once the value has fallen below the set temperature value or if a
new value is entered.
The outdoor weather alarm
When a set outdoor alarm has been triggered, it will flash on the
LCD display. The general outdoor alarm icon and HI / LO alarm
icon will flash accordingly. Example: In outdoor temperature mode,
the dew point icon will flash along the outdoor alarm and the HI
alarm icons when the dew point HI alarm is triggered. This will
indicate that the current alarm source is from the dew point.
d. MIN / MAX Mode
• Press MIN / MAX to enter the MAX mode. MAX and the
maximum record will be displayed.
• Press MIN / MAX to enter the MIN mode. MIN and the
minimum record will be displayed.
• Press MIN / MAX to return to the normal display mode.
• In MAX mode, press + to display the following maximum values with their time and date: Indoor humidity
maximum – Indoor temperature maximum – Outdoor humidity maximum – Outdoor temperature maximum
– Pressure maximum.
• In MIN mode, press + to display the following minimum values with their time and date: Indoor humidity
minimum – Indoor temperature minimum – Outdoor humidity minimum – Outdoor temperature minimum –
Pressure minimum.
• In MIN or MAX mode, hold SET pressed for 2 seconds to reset the respective value, time and date.
• Press SNOOZE / LIGHT to return to the normal display mode
6. Troubleshooting
Problem
Transmission problem
WS1170_V3
Possible Cause
• Distance between the two units is too long
• Shielding materials between two units
(thick wall, steel...)
• Interference from other sources
Temperature display mode
Dew point HI alarm triggered
Solution
• Reduce distance
• Find a different mounting location
• Eliminate interference sources
6 VELLEMAN