Publicidad
Idiomas disponibles
Idiomas disponibles
Cyclonic Vacuum Cleaner Use instructions
COMPONENTS Fig. A
1. Handle
2. Hanging hole
3. Power cord winding hook
4. Locking handle button
HOW TO OPERATER YOUR VACUUM CLEANER
1. Hold the vacuum cleaner firmly with your hand on the handle. Open the dust cup to see whether
the filter is good.
2. Push the ON/OFF Power Switch to "ON" position.
3. Start vacuuming.
CAUTION: Make sure that you hold vacuum cleaner firmly. otherwise it can slip out of you hand and
cause injury.
CLEAN THE HEPA Fig. B
Waring: Always unplug from electrical outlet before opening the Dust Cup.
When the dust container is full of dust, please empty dust rinse the container in warm water and dry
completely before putting it back into the appliance.
WARNING:
Do not put the dust container and HEPA into the appliance when they are wet. Before fixing, please
make sure that they are all dry completely.
TECHNICAL SPECIFICATIONS
Power consumption: 1000W
Power supply: 220-240V 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product
without any notice.
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), re-
quires that old household electrical appliances must not be disposed of in the normal unsorted
municipal waste stream. Old appliances must be collected separately in order to optimize the reco-
very and recycling of the materials they contain, and reduce the impact on human health and the
environment.
The crossed out "wheeled bin" symbol
that when you dispose of the appliance, it must be separately collected.
5. On/Off switch
6. Electric motor
7. Dust container
8. Floor brushOT
on the product reminds you of your obligation,
9
Publicidad
