Publicidad
Idiomas disponibles
Idiomas disponibles
CLEANING
(DO NOT USE ANY DETERGENT)
7. Always store iron on its heel rest.
To clean exterior surfaces, use a damp soft cloth and
wipe dry. Do not use any chemical solvents, as these
will damage the surface.
8. Self-cleaning function. Hold iron over a sink. Fill
with water. Heat up iron. Move steam button to
self-cleaning position, hold for 5 seconds to empty
water from steam holes. Release button to stop self-
cleaning function.
TROUBLESHOOTING
Problem
Soleplate is not heating even though
iron is turned on.
Iron does not produce steam.
Spray function does not work.
Steam jet and vertical steam jet
function does not work.
Brown streaks come out of the
soleplate while ironing and stain the
linen.
DISPOSAL
Recycle the materials with the symbol
Put the packaging in applicable containers to recycle it.
Help protect the environment and human health and to
recycle waste of electrical and electronic appliances.
9. Cleaning the soleplate. Do not use scouring pads
Possible cause
Connection problem
Temperature control is in MIN position.
Not enough water in tank.
Steam control is selected in non-steam
position.
Selected temperature is lower than that
specified to use with steam.
Not enough water in tank.
Steam jet function was used very
frequently within a short period.
Iron is not hot enough.
You have used hard water, which has
caused scale flakes to develop in the
water tank.
You have used chemical descaling
agents.
Fabric fibres have accumulated in the
holes of the soleplate and are burning.
Fabrics might not be properly rinsed or
the garments are new and have not been
washed before ironing.
.
Do not dispose appliances marked with the symbol
with the household waste. Return the product to your
local recycling facility or contact your municipal office.
or harsh cleaners on the soleplate as these will
damage the surface. To remove burnt residue, iron
over a damp cloth while iron is still hot. To clean the
Glissium™ soleplate, simply wipe with soft damp
cloth and wipe dry.
Solution
Check main power supply cable, plug
and outlet.
Select adequate temperature.
Fill water tank (see "Getting started",
no 2).
Set steam control between positions of
minimum steam and maximum steam
(see "Ironing chart").
Increase temperature to at least
Fill water tank (see "Getting started",
no 2).
Put iron on horizontal position and
wait before using steam jet function.
Adjust the proper temperature to
steam ironing (up to
in vertical position and wait until
temperature indicator light turns off.
Use the self-clean function one or
more times.
Do not use any descaling agents.
Use the self-clean function one or
more times. Clean the soleplate with a
damp soft cloth.
Please rinse the laundry properly
again.
BG
CS
DA
DE
EE
EN
ES
FI
Fr
.
Hr
Hu
It
). Put iron
Lt
Lv
NL
No
pL
pt
ro
ru
SK
SL
Sr
Sv
tr
uK
21
Publicidad
