Publicidad
Idiomas disponibles
Idiomas disponibles
1
YEAR
WARRANTY
• Always wearing eye protector items when using helmet without filter, and checking with eye protector's
specification and make sure it meet the needs.
• Checking helmet as well. Otherwise safety cannot be guaranteed.
• Improper use of the eye-protector(injury, accident). The eye protection device must only be used for the work
described in the instructions for use. Any deviation from the instruction may cause injury or accident.
• Always wear safety glasses or goggles under the welding helmet and protection clothing to protect your skin from
radiation, burns and spatter.
• Please be aware of that the used materials are not known to cause any skin irritation or other kind of innocuousness.
Nevertheless, very susceptible human skin may suffer from skin irritation when in touch with the used materials.
2. MARKINGS
CE 4/5-8/9-13 YXE 1/1/1/2 En379 CE
4- Light state scale number
5-8/9-13-Protection shade numbers in closed state
YXE=Manufacturer identification
1-Optical class
1- Diffusion of light class
1-Variation in luminous transmittance class
2-Angle of Dependence classification
EN379- Number of the standard
3. STORAGE AND MAINTENANCE
When not in use the filter should be stored in a dry place within the temperature -20°C to +70°C. Prolonged exposure
to temperatures above 45°C may decrease the battery lifetime of the auto darkening welding filter. It is recommend-
ed to keep the solar cells of the auto darkening welding filter in the dark or not exposed to light during storage in order
to maintain power down mode.
This can be achieved by simply placing the filter face down on the storage shelf It is always necessary to keep the solar
cells and the light sensors of the filter free of dust and spatters: cleaning can be done with a soft tissue or a cloth
soaked in mind detergent (or alcohol).Never use aggressive solvents such as acetone.
Filter should always be protected from both sides by protection screens(polycarbonate B grade ),which should be only
cleaned with a soft tissues or cloch. If protections are in any way damaged,they must be immediately replaced.
Protection cover Less,bot infernal and external(Polycarbonate),must be used in conjunction with the autodarkening
filter in order to protect it against permanent demange.
Helmet Marking Explanation
YXE=Manufacturer identification
F=impact resistance level 101 m/s
Cover lens markings
YXE- Manufacture identification
EN 166 number of the standard
B=impact resistance lavel 120 m/s
3
Publicidad
