Publicidad
Idiomas disponibles
Idiomas disponibles
Buttons for functions
These buttons can be used to execute the following
functions:
1
2
Number
Function
1
Completely repeat the last calibration.
2
Delete the result of the last measurement. To delete several results, this step can be repeated.
Calibration is then continued and all deleted measurements are repeated.
3
Define the zero position for the transducer ("Tare transducer").
4
Continue the current calibration step following a malfunction or a fault.
5
Open a sub-menu for selecting basic settings. Settings for the calibration object can be
changed here and stored in the database.
6
Load a stored measurement result from the database.
7
Print the measurement log. The measurement result is simultaneously stored in the database.
8
Save the measurement log to the database.
9
Show or hide the input field for comments. On showing, the enlarged bar display is
simultaneously shown in enlarged form.
10
Select input or output calibration.
Operating the TORKMASTER 4
programme
Further notes on operating the TORKMASTER
programme can be found in the online help.
The online help also contains information on
changing basic settings.
3
4
5
Using the TORKMASTER 4 programme
6
7
8
9
10
31
Publicidad
