Livoo SL261 Manual De Instrucciones página 12

P
roceed in the same way to set the minutes, then press the SET button again to exit alarm settings.
When you're setting the alarm, the alarm is turned on by default and the screen display the symbol
To turn the alarm ON or OFF, press briefly the SET button to enter alarm mode. Press the UP or DOWN
button to turn on or off the alarm. The " " symbol should show next to the clock display when the alarm
is on. Press the UP or DOWN button again to turn off the alarm.
When the alarm is on, it will begin beeping with one short beep repeated every 2 seconds and continue
with two short beeps every 2 seconds if the alarm rings longer than 20 seconds. You can snooze the
alarm for 5 minutes by pressing the SNZ/LIGHT button.
7. Indoor / outdoor temperature and humidity
Indoor temperature : from -9.9°C up to 50°C (14.18°F ~ 122°F). 'LL.L' will be displayed when temperature is
below -9.9°C and 'HH.H' when higher than 50°C.
Outdoor temperature : from -40°C up to 70°C (-40°F ~ 158°F), 'LL.L' will be displayed when temperature is
below -40°C and 'HH.H' when higher than 70°C.
Indoor and outdoor humidity range : 20%-95%. When humidity is below 20%, '20%' will be displayed on
the screen. When higher than 95%, '95%' will be displayed on the screen.
When alarm ringing, temperature and humidity test will be stopped.
8. Accuracy
Temperature resolution: 0.1°C
Humidity resolution: 1 %RH
Temperature accuracy:
-40°C ~ -20°C: ± 4°C
-20°C ~ 0°C: ± 2°C
0°C ~ +50°C: ±1°C
Note: when the temperature is within 50°C to 70°C, the temperature is only for reference.
Humidity accuracy :
Accuracy of +/- 5% at 25°C and when humidity is between 30% and 60%.
Accuracy of +/- 10% at a temperature of 25°C and when the humidity rate is between 20% and 29%, 61%
and 95%.
9. Temperature alert set
In standard mode, press "ALERT" to enter alert mode, use "UP" or "DOWN" to turn on or off each
temperature or humidity alert function. When the alert is on, the symbol
In standard mode, press and hold "ALERT" to set temperature & humidity alert function in the following
order :
a) outdoor temperature upper limit. b)outdoor temperature lower limit. c)outdoor humidity upper limit
d) outdoor humidity lower limit. e)indoor temperature upper limit. f) indoor temperature lower limit
g) indoor humidity upper limit h)indoor humidity lower limit i)exit.
Press 'SET' button to valid each parameter defined and switch to the next one.
In set, press "UP" to go ahead by once. Hold "UP" to go ahead at 8 steps per second.
In set, press "DOWN" to back by once. Hold "DOWN" to go back at 8 steps per second.
If you don't push any button during 10 second, you will exit the setting menu.
10. Temperature and humidity alert
If you've activated temperature or humidity alert, the alert icon will flash and a sound will also be emitted
when an alert is on.
Press any button to stop the sound but the temperature and the alert icon will continue to flash.
Indoor and Outdoor Comfort Display:
Too dry 1%~25%
Dry 26%~39%
Comfort OK 40%~75%
Wet 76%~83%
Too wet 84%~99%
www.livoo.fr
is displayed on the screen.
.