Descargar Imprimir esta página

HAMPTON BAY FLOWE Guía De Uso Y Mantenimiento página 15

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly - Attaching the Fan Blades
2
Attaching the blades
Mount the fan blades (G) to the blade bracket (H) by aligning
the three key-slot holes in the blade (G) with the three posts
on the top of the blade brackets (H).
Hold the blade (G) with both hands close to the blade bracket
(H) and press the blade (G) down firmly. Ensure the key-slot
holes are properly seated on the blade arm posts.
While still holding the blade (G) down with both hands, firmly
slide the blade (G) away from the fan-motor assembly (E) until
the blade (G) engages in the locking mechanism. Make sure
the steel locking mechanism at the rear of the blade bracket
(H) springs upward and snaps into place against the edge of
the blade (G) indicating a secure connection.
Visually inspect the top of the blade bracket (H) to ensure the
locking mechanism is securely in place.
Repeat for the remaining blades (G).
Assembly - Attaching the Lights
1
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
IMPORTANT: It is critical to attach the light kit using the quick
connector. The fan will not operate unless the light kit is
connected to the fan.
NOTE: Notice the location of the fan's slide switch. This is the
switch used to change the fan's directional rotation. For more
information on the operation of this switch, see Operating
Your Fan on page 17.
NOTE: This light kit cannot be transferred to another fan.
Remove the three light kit mounting screws (RR) on the black
bracket below the fan-motor assembly (E).
Plug the molded adaptor plug from the light kit (F) to the
molded adaptor plug from the fan-motor assembly (E). Make
sure the connector latch close properly.
Align the holes in the light kit (F) with the holes in the black
bracket below the fan-motor assembly (E) and install using
the light kit mounting screws (RR) that were removed in the
first step above.
15
Please contact 1-855-HD-HAMPTON for further assistance.
G
H
E
RR
F
HAMPTONBAY.COM

Publicidad

loading

Este manual también es adecuado para:

42010999131000 022 6521000 019 369