Descargar Imprimir esta página

N'oveen IKN120 Manual De Instrucciones página 4

Matamoscas eléctrico

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
ENGLISH
PLEASE READ CAREFULLY AND SAVE THESE INSTRUCTIONS
Thank you for choosing our product. Read carefully before submitting, installing, switching on or maintaining
this device. Protect yourself and others by following the safety instructions. Insects are electrocuted by the
electrically-charge metal grids. No chemicals, no smell, no sprays, no mess, pollution free and harmless to
humans and pets.
Warnings and general information:
1. Suitable for indoor use.
2. High voltage ! Do not touch the inner electric grids
3. Never put metal objects inside the grids while in operation.
4. Keep away from flammables.
5. Make sure that the voltage and frequency of the current are suitable for this device. Check the local voltage
before operating.
6. Use in a place where children cannot reach.
7. Keep the appliance and its cord out of reach of children.
8. Children cannot play with the device.
9. The Insect Killer cannot be used in barns, stables and similar locations.
10. The appliance is not to be used in locations where flammable vapor or explosive dust is likely to exist.
11. Unplug the appliance before cleaning. Clean the plastic enclosure/ grille with dry clothe.
12. This device may be used by children from 8 years and above and persons with limited physical, sensory or
mental abilities or lack of experience and knowledge if they have been supervised or instructed regarding the
use of the device in a safe and understandable manner related hazards. Cleaning and maintenance should
not be carried out by children without supervision.
DEVICE DESCRIPTION
1. High voltage mesh
2. Flashlight
3. Switch (flashlight, mesh, off)
HOW TO USE
1. Charging voltage: AC220V / 50Hz, grid voltage during operation: about 3500V.
2. Charge the battery for 6-8 hours before first use.
3. Set the switch (3) to the "ON1" position and press the button (4) on the side of the handle. The high voltage
grid is active.
4. Turning on the flashlight: set the switch (3) to the "ON2" position.
5. Set the switch to the "OFF" position while charging or when you are not using the foot.
4. Mesh on
5. Charging plug
4
EN

Publicidad

loading