Next Level Racing F1GT Manual De Instrucciones página 6

F1GT SIMULATOR COCKPIT
Step 7: F1 ASSEMBLY
WHEEL PLATE
3.
2 X 50MM BOLTS.
Repeat both sides.
5. Attach PEDAL PLATE to the
PEDAL ANGLE BAR using 2 X
16MM BOLTS on each side.
Repeat both sides.
*For F1- Recommend attaching
at bottom of PEDAL PLATE as
2. Insert WHEEL SUPPORT BARS.
pictured
Use the 2 X 16MM BOLTS on each side
to adjust height.
PEDAL PLATE
1.
2 X 60MM BOLTS.
4. Attach PEDAL ANGLE BAR using
Repeat both sides.
2 X 60MM BOLTS.
*Once you're happy with the
Repeat both sides.
PEDAL ANGLE BAR
position, tighten as much as possible
to ensure wheel support is strong
and rigid.
For assistance please contact: support@nextlevelracing.com
www.nextlevelracing.com