General Safety Instructions - IML newBCC 300M Manual De Instalación Y Mantenimiento

IMPORTANT: The manual you are reading contains fundamental information
regarding the safety measures to be adopted when installing and starting up.
It is therefore of utmost importance that both the installer and the user read the
instructions before assembling and starting up.

1. GENERAL SAFETY INSTRUCTIONS

These symbols (
following the corresponding instructions.
DANGER. Electrocution risk.
Non-compliance with this instruction involves a risk of electrocution.
DANGER.
people or things.
ATTENTION.
the pump or the unit.
2. GENERAL SAFETY RULES
GENERAL OBSERVATIONS.
• The machines mentioned in this manual are especially designed to carry out the
pre-filtration and the circulation of water in swimming pools.
• They are designed to work with clean water at a temperature that does not exceed
35ºC.
• Installation should be carried out in accordance with the specific indications for
each step.
• The regulations in force for the prevention of accidents should be heeded.
• Any modification that may be made to the pump requires the previous authorisation
of the manufacturer. The original manufacturer-authorised spares and accessories
guarantee greater safety. The pump manufacturer is exempt from all responsibility
for damage caused by the use of unauthorised spares or accessories.
• During operation the electrical parts of the pump are live. Work can only be carried
out on each machine or on connected-equipment after having disconnected
them from the electrical supply network and having disconnected the starting
mechanisms.
• The user must make sure that assembly and maintenance work is carried out by
qualified and authorised people who have previously carefully read the installation
and service instructions.
• The operating safety of the machine is only guaranteed with the compliance and
respect for that mentioned in the installation and service instructions.
• The value limits stated in the table of technical specifications must under no
circumstances be exceeded.
• In the case of defective operation or breakdown, contact the nearest manufacturerʼs
agent or the manufacturerʼs Technical Customer Service.
) represent the possibility of danger as a result of not
Non-compliance with this instruction involves a risk of danger to
Non-compliance with this instruction involves a risk of damaging
17
ENGLISH